2102 Parking Control Barrier Gate Operator
The Model 1602 is for use in applications such as industrial sites and loading dock areas, designed to control wide traffic lanes. The heavy-duty Harmonic Arm Linkage assures smooth and accurate Arm travel of 90° in approximately 5.5 seconds.
These Operators are designed so they can be mounted on either the left or right hand side of the roadway. Battery- powered Convenience Open option available, which provides a method to open the gate if AC power is lost.
2102 Parking Control Barrier Gate Operator
Traffic Control Barrier Options That Fit Any Application
The 1602 operator is designed for traffic lanes up to 27-feet wide in low use commercial and industrial applications. This operator uses a counter-balanced three-piece wishbone style arm assembly. The 1602 operator is designed so that it can be mounted on either the left or right-hand side of the roadway. LED/Reverse edge light kits are available for the Octagonal arms only. The operator can be equipped with a DC convenience open package (optional) that will automatically raise the arm in the event of a power outage.
Optional Battery-Powered
Convenience Open
Suitable for Low-Cycle
Commercial & Industrial Use
Barrier Designed for
Wide Traffic Lanes
Applications
Product Features
Perimeter Access Management System
Automatic sequencing inputs for use with Slide and Swing Gate Operators.
Massive Lanes
Designed to control wide traffic lanes in limited use applications such as industrial sites and loading dock areas —27 feet maximum
DKS Pedestrian Protection System
It’s aware — even when they’re not.
Left or Right Hand Mount
Operators are designed so they can be mounted on either the left or right hand side of the roadway.
Octagonal Lighted Signal Arm
Light the way for customers to exit easily and safely with signals and sensors.
Wishbone Style Joint and Cable Tensioners
Allows Arms up to 27 ft (8.2 m) in length.
Technical Specifications
20′ / 24′ / 27′ Maximum Arm Lengths
Left or Right Hand Mount
Arm Styles: Aluminum Round / Octagonal Wishbone, Aluminum Octagonal Single & Wood Rectangular*
Arm Rotates 90° in Approx. 5.5 Seconds
1 HP Continuous Duty Motor
Specifications
- 1 HP continuous-duty motor.
- 60:1 gear-box running in a continuous oil bath.
- 115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
- Arm rotates 90° in approximately 5.5 seconds.
- Class III and IV applications.
- Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, entrapment protection devices need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
- Dimensions (operator only): 15.25″W x 39.75″H x 15.75″D.
Options
- Aluminum Round Wishbone Arms: 20 Feet, 24 Feet, 27 Feet
- Aluminum Octagonal Wishbone Arms: 20 Feet, 24 Feet, 27 Feet
- Aluminum Octagonal Single Arms: 17 Feet
- LED/Reverse edge light kits (Octagonal arms only)
- 20-Foot Wood Arm (requires 1602-041 kit)
- DKS Pedestrian Protection System
- Plug-in loop detectors.
- DC powered convenience open.
- Heater kit.
- Fan kit.
- Surge suppressors.
- Manual Crank kit (factory installed option only).
Mechanical
- Magnetic limit control.
- Ports for plug-in loop detectors.
- Automatic sequencing inputs for use with slide and swing gate operators.
- Up input memory buffer.
- Down memory option.
- Multiple up commands.
- Two convenience outlets.
- Gate tracker reporting output.
- Programming switches.
- Built-in power On/Off switch.
- Left or right hand mount.
Dimensions and Weight
| Part Number | 2-Piece Single Arm | Maximum Length | |
| 1601-805 | Octagonal Aluminum | 17 Feet | |
| Part Number | 3-Piece Wishbone Arm Types | Maximum Length | |
| 1602-162 | Round Aluminum | 20 Feet | |
| 1602-164 | Round Aluminum | 24 Feet | |
| 1602-166 | Round Aluminum | 27 Feet | |
| 1602-282 | Octagonal Aluminum | 20 Feet | |
| 1602-284 | Octagonal Aluminum | 24 Feet | |
| 1602-287 | Octagonal Aluminum | 27 Feet | |
| 1602-340 | Wood | 20 Feet | |
| Aluminum arms include necessary hardware kits. | |||
| 1602-340 arm requires 1602-041 mounting kit. | |||
Tech Support
Find all the documentation needed to install, program, and operate your DKS product below.
Resources
DKS Product Videos
