1625 TRAFFIC CONTROL
WEDGE BARRIER SYSTEM
1625 WEDGE BARRIER
Surface Mount
- Surface mount for quick, easy installation
- Fast speed – raises and lowers in approximately 3.5 seconds
- Simple mechanical linkage to DKS 1602-590 Operator keeps Barrier Arm and Wedge Barrier in sync – no separate motors or hydraulic valves to worry about
- Red (down) / Green (up) LED lighted Barrier Arm for high visibility
Fast Raise and Lower
of the heavy steel wedge is possible with the use of precise counter weight
Surface Mount
for quick and easy installation or where in-ground digging is prohibitive
Lighted Top Arm
for added visibility and safety
Certification
ASTM F2656 PU-30-(P1, P2)
ACCESS CONTROL SOLUTIONS
* The 1625 lane barrier is not a stand-alone product. It must be used with a DKS 1602-590 Operator (sold separately).
The 1625 is ideally used with passenger vehicles and light-duty trucks.
TECHNICAL FEATURES
MECHANICAL
Anchor Plates are 1/2 in (12.7mm) A36 steel
Anchor post assembly are surface mounted and provide 16 anchor points on each post. The wedge plate has a total of 22 anchor points for an overall total of 54 anchor points for a dependable installation that’s quick and easy.
Wedge barrier is counter-balanced and mechanically linked to the 1602-590 operator. No hydraulics or
environmental issues to worry about.
Lane barrier assembly is zinc plated and finished in power-coat full gloss smooth super polyester
1625 WEDGE BARRIER
Steel wedge barrier and heavy duty steel posts provide a formidable barrier to help prevent passenger vehicles and light-duty trucks from driving through a controlled traffic lane, without the expense of bollards, wedges, or crash beams. (Not crash rated.)
Surface mount (concrete only) for quick, easy installation
Integrated lighted Arm for high visibility
Fast speed – raises and lowers in approximately 3.5 seconds
Simple mechanical linkage to DKS 1602-590 Operator
Operator keeps Barrier Arm and Wedge Barrier in sync – no separate motors or hydraulic valves to worry about
Actual lane width for 12 ft. unit is 11 ft. 8 in. (3.55m)
Actual lane width for 14 ft. unit is 13 ft. 8 in. (4.16m)
Installs for thousands of dollars less than crash rated systems
MISCELLANEOUS
1602-590 Operator is sold separately. 1625 wedge barrier includes linkage hardware and counterbalance weights.
CERTIFICATION
The 1625 Wedge Barrier has been crash tested per ASTM F2656 – Standard Test Method for Vehicle Crash Testing of Perimeter Barriers and is rated as follows:
12-Ft. Barrier: PU-30–P1
14 Ft. Barrier: PU-30-P2
16 Ft. Barrier: PU-30-P2
18 Ft. Barrier: PU-30-P2
DOORKING, INC.
Access Control Solutions since 1948
120 Glasgow Avenue, Inglewood, California 90301 U.S.A.
Tel: 310-645-0023 FAX: 310-641-1586
www.doorking.com
© 2024 All Rights Reserved. Product specifications may change without notice. Rev. 7/24
MEMBER:
