1625 Surface Mount Wedge Barrier System
The Wedge Barrier is ideal in applications where a higher degree of vehicle traffic control is desired, but without the expense of bollards or crash beams – making it ideal for apartment communities, gated condominiums, car rental agencies, parking lots and toll booths. The Wedge Barrier must be used with the 1602-590 operator (sold separately).
Surface/shallow mount system provides cost savings over foundation mount crash systems
Help prevent passenger vehicles and light-duty trucks from driving through a controlled traffic lane.
The DKS Wedge Barrier Accessory System is designed to be used with the 1602-590 operator. The Wedge Barrier is ideal in applications where a higher degree of vehicle traffic control is desired, but without the expense of bollards, wedges or crash beams – making it ideal for apartment communities, gated condominiums, car rental agencies, parking lots and toll booths.
Certification to ASTM F2656-23, PU-30 (P1,P2).
A vehicle weighing 5,070 lb traveling at 30 mph will not shear or budge the 1625 Wedge on direct impact.
CAUTION: not to be used in areas subject to freezing weather with the potential for snow and ice accumulation.
1602-590 Operator
Premium Accessory
Affordable Install with
Surface Mount Design
23.5″ Tall Wedge Barrier
for Light Duty Trucks
Applications
Product Features
![DKS Doorking 1625 traffic control Tall Wedge DKS Doorking 1625 traffic control Tall Wedge](https://www.doorking.com/wp-content/uploads/2023/03/DKS-Doorking-1625-traffic-control-Tall-Wedge.webp)
Stop Them with the 23.5” Tall Wedge
The heavy-duty reinforced steel wedge and posts are engineered to deliver debilitating damage to passenger vehicles and light-duty trucks attempting to drive through a controlled traffic lane. Not only tough but fast too, the Wedge raises and lowers in approximately 3.5 seconds, stopping vehicles with a reinforced surface area of 23.5” high by up to 13’ 8” wide of solid steel — backed by the simple physics of a timeless Wedge.
![DKS Doorking 1625 traffic control DKS Doorking 1625 traffic control](https://www.doorking.com/wp-content/uploads/2023/03/DKS-Doorking-1625-Demand-Respect-with-the-1625-traffic-control.webp)
Demand Respect with the 1625 Wedge
The 1625 Wedge Barrier System provides the engineering and physical theft to stop barrier runners in their tracks — preventing theft, additional costly repairs, and further damage.
The 1625 is counter balanced and designed for simple mechanical linkage to the 1602-590 Operator, keeping Barrier Arm and Wedge Barrier in sync — with no separate motors or hydraulic valves to worry about.
![](https://www.doorking.com/wp-content/uploads/2017/10/1620-traffic-control-Lighted-Top-Arm-features.webp)
Lighted Top Arm
for added visibility and safety
![](https://www.doorking.com/wp-content/uploads/2023/03/1625-traffic-control-Surface-Mount-features.webp)
Surface Mount
for quick and easy installation or where inground digging is prohibitive
![](https://www.doorking.com/wp-content/uploads/2023/03/1625-traffic-control-Reinforced-Steel-Wedge-features.webp)
Heavy Duty
Reinforced Steel Wedge damages barrier runners vehicles
![](https://www.doorking.com/wp-content/uploads/2023/03/1625-traffic-control-Fast-Raise-and-Lower-features.webp)
Fast Raise and Lower
of the heavy steel wedge is possible with the use of precise counterweight
Technical Specifications
Specifications
- Anchor Plates are 1/2 in (12.7mm) A36 steel
- Anchor post assembly are surface mounted and provide fourteen (16) anchor points
- Wedge barrier is counter-balanced and mechanically linked to the 1602-590 operator. No hydraulics or environmental issues to worry about.
- Lane barrier assembly is zinc plated and finished in power-coat full gloss smooth super polyester
1625 Wedge Barrier
- Steel wedge barrier and heavy duty steel posts provide a formidable barrier to help prevent passenger vehicles and light-duty trucks from driving through a controlled traffic lane, without the expense of bollards, wedges, or crash beams. (Not crash rated.)
- Surface mount (concrete only) for quick, easy installation
- Integrated lighted Arm for high visibility
- Fast speed – raises and lowers in approximately 3.5 seconds
- Simple mechanical linkage to DKS 1602-590 Operator
- Operator keeps Barrier Arm and Wedge Barrier in sync – no separate motors or hydraulic valves to worry about
- Actual lane width for 12 ft. unit is 11 ft. 8 in. (3.55m)
- Actual lane width for 14 ft. unit is 13 ft. 8 in. (4.16m)
- Actual lane width for 16 ft. unit is 15 ft. 8 in. (4.77m)
- Actual lane width for 18 ft. unit is 17 ft. 8 in. (5.38m)
- Installs for thousands of dollars less than crash rated systems
Features
- Surface mount for quick, easy installation
- Fast speed – raises and lowers in approximately 3.5 seconds
- Simple mechanical linkage to DKS 1602-590 Operator keeps Barrier Arm and Wedge Barrier in sync – no separate motors or hydraulic valves to worry about
- Red (down) / Green (up) LED lighted Barrier Arm for high visibility
Miscellaneous
- 1602-590 Operator is sold separately.
- 1625 wedge barrier includes linkage hardware and counterbalance weights.
*This Wedge Barrier is not recommended for use in areas subject to freezing weather.
Dimensions and Weight
ANCHOR POST
8” x 8” x 1/4” Steel (203.2mm x 203.2mm x 6.35mm)
54” High + cap (1.37m)
BASE
12 in. x 58.75 in. (304.8mm x 1492mm)
1/2 in steel (12.7mm)
16 anchor points
AVAILABLE LANE WIDTH
12 ft. (3.66m), clear opening is 11 ft. 8 in. (3.55m)
14 ft. (4.27m), clear opening is 13 ft. 8 in. (4.16m)
16 ft. (4.87m), clear opening is 15 ft. 8 in. (4.77m)
18 ft. (5.48m), clear opening is 17 ft. 8 in. (5.38m)
Tech Support
Find all the documentation needed to install, program, and operate your DKS product below.