1520/1524 Stand Alone Card Readers
The 1520 provides users with a full feature, single door, stand-alone Access Control System. The 1520 is available with a built-in Proximity Card Reader, or can be ordered as a single door Controller, allowing the user to add their own 26-bit Access Control Device.
The 1524 can be programmed with a handheld programmer or with programming cards, and is available only with a DK Prox Card Reader.
The Stand Alone Door and Gate Control
The model 1520 provides users with a full feature single door stand-alone access control system. The 1520 is available with a built-in proximity card reader (DK ProxPlusTM, DK Prox, AWID or HID) or can be ordered as a single door controller allowing the user to add their own 26-bit access control device.
The 1524 is available only with a DK Prox card reader. Contact your professional DKS system installer for more information about this and other DKS products.
Standalone Single-Door
or Gate Access Control
Programming Options via
Keypad, Handheld Remote or Card
Compatible with DKProx, AWID,
HID or a 26-bit Wiegand Device
Applications
Product Features
Clicker and a Card
Proxmitters allow use as a Clicker and a Card.
Easy Programming
Programming via the built-in programming Keypad.
Technical Specifications
Up to 1,000 Device Codes
2″ to 4″ Read Range
Compatible with Cards & Transmitters
Standalone Access Device
Compatible with 26-bit Wiegand Devices
Specifications
1520
- Stores up to 1000 card codes
- Transaction buffer stores last 3600 events
- Timed anti-pass back (1-59 minutes)
- Four time zones
- Clock and transaction buffer maintain data for up to 3 days in the event of a power outage
- Print Menu.
- Real time print mode.
- Form “C” dry contact relay
- 16 VAC, 20 VA power transformer supplied.
1524
- Stores up to 1000 card codes
- Form “C” dry contact relay
- 12 VDC power supply included
Mechanical
1520Â
- Built-in proximity card reader (available with DK ProxPlus, DK Prox, AWID or HID reader)
- Available as a controller only (add your own 26-bit wiegand device)
- Built-in programming keypad
- Indoor or outdoor use
1524
- Built-in DK Prox card reader
- Program with a hand held programmer or with programming cards
- Available as a mullion mount or with an outdoor enclosure
- Indoor or outdoor use
Miscellaneous
- Output is a form C dry contact relay rated at
- 30 Volt, 1 Amp
- Operating temperature -31° to 150° F (-35° to 65° C)
- Card readers are ETL Listed
1520 Card Reader and Controller Dimensions and Weight
Shipping weight approximately 8 Lbs. (3.6 kg)
1524 Card Readers Dimensions and Weight
Tech Support
Find all the documentation needed to install, program, and operate your DKS product below.