interior-gate-access-devices

TECHNICAL FEATURES

MEMBER:

1200-006 3-button

1211-081 exit button

DOORKING, INC.

1211-080 exit button

120 Glasgow Avenue, Inglewood, California 90301 U.S.A. Tel: 310-645-0023 FAX: 310-641-1586 www.doorking.com

3-position control switch for automated vehicular gates, interior use only Center position is neutral for normal operation Down position is momentary contact to open a gate Up position is toggled to hold a gate open Can be used with most gate operators

Access Control Solutions since 1948

CONTROL STATIONS - DOOR/GATE

Momentary contact Mortise cylinder can be re-keyed to match existing locks N.O. or N.C. operation Indoor use only

CONTROL STATIONS - INTERIOR

1200-017 gate control toggle

Provides manual control of automated vehicular gates, interior use only OPEN - CLOSE - STOP control Operates with DKS models 6050, 6100 and 6300 only

3-button Interior/Exterior

TAP HERE FOR PRINTER VERSION

1206-080 mortise cylinder keyswitch

Open – Close – Stop indoor and outdoor control Stations Manual gate controller provides normal, momentary open or hold open operation

ready for easy wall installation

Gate Control Stations

1200-007 3-button interior

Construction

Features All interior control are designed to mount into a single-gang electrical box except the model 1211-081 exit button, which is designed for mullion mounting. All interior controls are designed to control a single door/gate only Operating Temperature: -10 F to 145 F (-23 C to 62 C)

Features All interior controls are designed to mount into a single-gang electrical box. (1211-081 is mullion mount) Designed to control a single gate only. Operating Temperature: -10 F to 145 F (-23 C to 62 C)

3-buttonInterior

ACCESS CONTROL

allows the 1211-081 exit button to be mounted into the door jam

DOOR/GATE OPERATOR CONTROL STATIONS

CONTROL STATIONS PROVIDE MANUAL CONTROL FOR A SINGLE DOOR OR SINGLE GATE CONTROL REQUIREMENTS

Slim Design

Models

for easy access at guarded entries

Manual Control Interior

1211-016 3 button gate controller is weather resistant for exterior mounting

Manual Control

1. Can only be used with DKS models 6050, 6100, 6300. 2. Do not use with DKS 6060, 6100 or 6300 model operators.

INTERIOR & GATE ACCESS DEVICES

Mounts Anywhere

Key Switch

Provides a release device for doors secured with a magnetic lock or electric strike Lighted Exit push buttons Requires 12-VDC power to illuminate exit button. Stainless steel faceplate

Ideal for exterior applications, interior too Can be surface or post mounted OPEN - CLOSE - STOP control Operates with DKS models 6050, 6100 and 6300 only

Ideal for exterior applications, interior too Can be surface mounted NC Stop circuit OPEN - CLOSE - STOP control Can be used with most door and gate operators

RESIDENTIAL • APARTMENT COMPLEX/GATED COMMUNITIES • APARTMENT/ COLLEGE RESIDENTS HALLS • MIXED USE BUILDINGS • COMMERCIAL/ INDUSTRIAL • MAXIMUM SECURITY • SELF-STORAGE • PARKING

Controls mount into a single-gang electrical box (except 1211-081) 1211-081 exit button is mullion mounted Stainless steel faceplates Key switch uses mortise cylinder that can be re-keyed

Exit Buttons

Control Stations

Stainless steel faceplate Requires 12-VDC power to illuminate exit button Indoor use only

1200-016 3-button

INTERIOR CONTROL STATIONS

CONTROL STATIONS PROVIDE MANUAL CONTROL FOR A SINGLE DOOR OR SINGLE GATE CONTROL REQUIREMENTS

INTERIOR & GATE ACCESS DEVICES

3-button Interior/Exterior

RESIDENTIAL • APARTMENT COMPLEX/GATED COMMUNITIES • APARTMENT/ COLLEGE RESIDENTS HALLS • MIXED USE BUILDINGS • COMMERCIAL/ INDUSTRIAL • MAXIMUM SECURITY • SELF-STORAGE • PARKING

INTERIOR & GATE ACCESS DEVICES