TAP HERE FOR PRINTER VERSION
9570/9575 MAXIMUM SECURITY
SLIDE GATE OPERATOR
THE WORK HORSE OF MAXIMUM SECURITY
  • User adjustable variable speed control

  • Slow-start / slow-stop operation

  • High tensile strength roller chain provides a direct mechanical linkage to the gate, will not slip and is unaffected by weather or other contaminates such as dirt, oil, grease, ice, etc.

  • Integral internal direct driven limit switch system cannot be tampered with externally

  • 5-Year Limited Warranty
TM
Solid-State
Gate Tracker
Direct Drive
Large Gates
variable speed control
reporting output
limit switches
up to 25,000 lb
MAXIMUM SECURITY
TECHNICAL FEATURES
MECHANICAL
3/8” Steel frame

Lightweight 1/4” (6.25mm) polyethylene molded cover

Primary Reduction is provided by a 30:1 or 10:1 heavyduty gear reducer running in a continuous oil bath.

Chain: includes 20’ of #100 Roller chain
TM
GATE TRACKER
Reporting output provides operator data to a DKS 1833, 1835, 1837 or 1838 access control system (requires 2358 expansion board)
OPTIONS
Heavy-duty 10 ga steel housing

Chain tray kit (p/n 2601-270) is available in 10-ft lengths and is recommended on gates exceeding 20-ft in length

Red/Green traffic signal provides a visual indication when it is OK for traffic to proceed
ELECTRICAL
Adjustable speed control circuit: 1-2 ft/sec

Slow start / slow stop

Adjustable partial open

Anti-tailgating

Selectable stop / reverse loop function

Direct driven limit switches

Built-in power switch

Built-in 3-button control (open-close-stop)

Warn-before-operate function

Built-in diagnostics check for specific fault conditions

Port for plug-in loop detectors (DKS Detectors only)

Two 115 VAC Convenience outlets
MISCELLANEOUS
Environmental: 10°F to 140°F (-12°C to 62°C)

Thermostatically Controlled Heater Kit recommended for colder environments

Shipping weight approximately 225 lb (102 kg) Depending on model and options selected
* Operators with 30:1 gearbox are fail-secure and require mechanical disconnect to move gate. Operators with 10:1 gearbox can be back driven with mechanical assistance once power is removed.
SAFETY
MEMBER:
This Vehicular Slide Gate Operator is designed for Class III and IV applications only and should never be used in applications serving the general public such as apartment complexes, gated communities, residential applications, parking garages, etc.

Operator requires Type B1 and/or Type B2 entrapment protection in each direction of travel, otherwise the operator will not run.
DOORKING,  INC.
®
Access Control Solutions since 1948

120 Glasgow Avenue, Inglewood, California 90301 U.S.A. 
Tel: 310-645-0023   FAX: 310-641-1586
www.doorking.com

© 2021 All Rights Reserved. Product specifications may change without notice. Rev. 3/21