reporting output
TECHNICAL FEATURES
MEMBER:
Large Gates
DOORKING,  INC.
SAFETY
Optional Heavy Duty Pedestal
®
Heavy-Duty Mounting Pedestal is recommended for gates weighing over 1500 lb and is required if Chain Tray is used Chain Tray Kit (p/n 2601-270) is available in 10 ft lengths and is recommended on gates exceeding 20 ft in length Red / Green Traffic Signal provides a visual indication when it is OK for traffic to proceed
120 Glasgow Avenue, Inglewood, California 90301 U.S.A.  Tel: 310-645-0023   FAX: 310-641-1586 www.doorking.com© 2021 All Rights Reserved. Product specifications may change without notice. Rev. 3/21
1. III = Limited Access; IV = Restricted Access 2. Plug-in loop detector ports; open and reverse. DoorKing plug-in loop detectors only. 3. Requires 9200-135 pedestal.
Access Control Solutions since 1948
Reporting output provides operator data to a DKS 1833, 1835, 1837 or 1838 access control system (requires 2358 expansion board)
INDUSTRIAL    •  MAXIMUM SECURITY
OPTIONS
TAP HERE FOR PRINTER VERSION
GATE TRACKER
open gate short distance for cars or open fully for trucks
Partial Open
Gate Tracker
TM
ELECTRICAL
SLIDE GATE OPERATOR
motor drive
MORE APPLICATIONS MAXIMUM SECURITY MAXIMUM CHOICES WITH SPEED CONTROLS
Fail-Secure Operator. Electrical Interlock prevents gate from starting during manual operation Slow Start / Slow Stop Adjustable Partial Open Limit Selectable Stop / Reverse Loop Function Anti-Tailgating Feature Solid-State Motor Relays Power Boost Start Circuit Direct Driven Limit Switches for precise gate control Built-In Power and Reset Switches Two 115 VAC Convenience Outlets Ports for plug-in Open and Reverse Loop Detectors (DKS Loop Detectors only)
TM
Variable Speed
Environmental: 10°F to 140°F (-12°C to 62°C) Thermostatically Controlled Heater Kit recommended for colder environments Shipping weight approximately 225 lb (102 kg) Depending on model and options selected
9220 VEHICULAR
9220 2 HP
MISCELLANEOUS
User Adjustable Variable Speed Control from 1/2 ft/sec up to 2 ft/sec Special Anti-Tailgating and Partial Open features help to reduce unauthorized vehicle access Selectable Loop Function (stop or reverse), and ports for plug-in Loop Detectors simplify wiring and make installation easy Direct Driven Limit Switches for precise gate control 5-Year Limited Warranty
up to 2000 lb
Primary reduction is provided by a 30:1 gear running in a continuous oil bath Operator is shipped with Chain Brackets, Hardware and 20 ft of #60 Chain Adjustable Solid State Speed Control, 1/2 to 2 ft/sec Housing is G90 Galvanized Steel painted charcoal grey with stainless steel Access Door
This Vehicular Slide Gate Operator is designed for Class III and IV applications only and should never be used in applications serving the general public such as apartment complexes, gated communities, residential applications, parking garages, etc. Operator requires Type B1 and/or Type B2 entrapment protection in each direction of travel, otherwise the operator will not run.
MECHANICAL
MORE APPLICATIONS MAXIMUM SECURITY MAXIMUM CHOICES WITH SPEED CONTROLS
Reporting output provides operator data to a DKS 1833, 1835, 1837 or 1838 access control system (requires 2358 expansion board)
INDUSTRIAL  •  MAXIMUM SECURITY
Optional Heavy Duty Pedestal
INDUSTRIAL  • MAXIMUM SECURITY