TECHNICAL FEATURES
MEMBER:
Solid State Motor Control
DOORKING,  INC.
SAFETY
Optional Heavy Duty Pedestal
®
Heavy-Duty Mounting Pedestal is recommended for gates weighing over 1500 lb and is required if Chain Tray is used Chain Tray Kit (p/n 2601-270) is available in 10 ft lengths and is recommended on gates exceeding 20 ft in length Red / Green Traffic Signal provides a visual indication when it is OK for traffic to proceed
120 Glasgow Avenue, Inglewood, California 90301 U.S.A.  Tel: 310-645-0023   FAX: 310-641-1586 www.doorking.com© 2021 All Rights Reserved. Product specifications may change without notice. Rev. 3/21
1. III = Limited Access; IV = Restricted Access 2. Plug-in loop detector ports; open and reverse. DoorKing plug-in loop detectors only. 3. Requires 9200-135 pedestal.
open gate short distance for cars or open fully for trucks
Access Control Solutions since 1948
Reporting output provides operator data to a DKS 1833, 1835, 1837 or 1838 access control system (requires 2358 expansion board)
INDUSTRIAL    •  MAXIMUM SECURITY
OPTIONS
Partial Open
TAP HERE FOR PRINTER VERSION
GATE TRACKER
reporting output
TM
Gate Tracker
ELECTRICAL
SLIDE GATE OPERATOR
direct driven and easily adjustable
MORE APPLICATIONS MAXIMUM SECURITY MAXIMUM CHOICES
Fail-Secure Operator. Electrical Interlock prevents gate from starting during manual operation Adjustable Partial Open Limit Selectable Stop / Reverse Loop Function Anti-Tailgating Feature Solid-State Motor Relays Power Boost Start Circuit Direct Driven Limit Switches for precise gate control Built-In Power and Reset Switches Two 115 VAC Convenience Outlets Ports for plug-in Open and Reverse Loop Detectors (DKS Loop Detectors only)
Limit Switches
Environmental: 10°F to 140°F (-12°C to 62°C) Thermostatically Controlled Heater Kit recommended for colder environments Shipping weight approximately 225 lb (102 kg) Depending on model and options selected
TM
9210 VEHICULAR
9210 1 HP
MISCELLANEOUS
Advanced Microprocessor Control Board features Programming Switches to set the mode of operation required and includes Built-In Diagnostics Special Anti-Tailgating and Partial Open features help to reduce unauthorized vehicle access Selectable Loop Function (stop or reverse), and ports for plug-in Loop Detectors simplify wiring and make installation easy Direct Driven Limit Switches for precise gate control 5-Year Limited Warranty
no relay contacts to wear out or burn
Primary reduction is provided by a 40:1 gear running in a continuous oil bath Operator is shipped with Chain Brackets, Hardware and 20 ft of #50 or #60 Chain Fixed Speed is approximately 10-12 inches/sec. Housing is G90 Galvanized Steel painted charcoal grey with stainless steel Access Door
This Vehicular Slide Gate Operator is designed for Class III and IV applications only and should never be used in applications serving the general public such as apartment complexes, gated communities, residential applications, parking garages, etc. Operator requires Type B1 and/or Type B2 entrapment protection in each direction of travel, otherwise the operator will not run.
MECHANICAL
MORE APPLICATIONS MAXIMUM SECURITY MAXIMUM CHOICES
INDUSTRIAL  •  MAXIMUM SECURITY
Optional Heavy Duty Pedestal
INDUSTRIAL  • MAXIMUM SECURITY