TAP HERE FOR PRINTER VERSION
9100 VEHICULAR
SLIDE GATE OPERATOR
Quiet, reliable & outstanding safety features
  • Electronic magnetic limits eliminate old style mechanical switches that can wear out, break or fail

  • Automatic self-setting limits mean no limit switch adjustments – ever

  • Safety – built-in mechanical and electronic reverse system

  • Advanced microprocessor control board features programming switches to set the mode of operation required and has ports for DKS plug-in loop detectors to simplify wiring

  • 5-Year limited warranty
Metal Cover
Polypropylene Cover
Entrapment Prevention
Built In
Fail-safe Release
Unique Design
never be locked out (or in)
reverses gate when obstructed
power switch and reset switch
allows easy access to all mechanical parts
RESIDENTIAL • COMMERCIAL
TECHNICAL FEATURES
MECHANICAL

Frame: G90 galvanized steel to prevent rusting

Cover: Steel or polypropylene cover available

Primary Reduction: Single cog belt

Speed: Approximately 10 in/sec (254 mm/sec)

Chain: Unit is shipped with 20 ft (6 m) of #40 roller chain, chain brackets, hardwarer

Fail-safe release standard

TM
GATE TRACKER
Reporting output provides operator data to a DKS 1833, 1835, 1837 or 1838 access control system (requires 2358 expansion board)
OPTIONS

Heater kit for cold weather environments

Base plate for post mounting

Fail-secure release kit

ELECTRICAL

Automatic limit adjustment

Auto-close timer 1-23 sec

Selectable stop / reverse loop function

Built-in On / Off switch

Built-in alarm reset switch

Programming switches allow you to set desired mode of operation

Partial-open and anti-tailgating features

Two 115 VAC convenience outlets for accessory transformers

Automatically assumes fail-safe mode when an entrapment condition exists

Ports for plug-in open and reverse loop detectors (DKS plug-in detectors only)

MISCELLANEOUS
* Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.

Environmental: 10°F to 140°F (-12°C to 62°C)

Thermostatically controlled heater kit recommended for colder environmentst.

Shipping weight approximately 125-185 lb (68-84 kg)

Operator requires monitored Type B1 and/or Type B2 entrapment protection devices

MEMBER:
Conforms To ANSI/CAN/UL 325:2017 Ed. 7 Certified To CSA C22.2 #247
Access Control Solutions since 1948

120 Glasgow Avenue, Inglewood, California 90301 U.S.A. 
Tel: 310-645-0023   FAX: 310-641-1586
www.doorking.com

© 2020 All Rights Reserved. Product specifications may change without notice. Rev. 6/20