* Assumes gate to be in good condition and swinging in a level plane. ** These operators use a step-down transformer to achieve 115 VAC operating voltage.

unique design prevents gear box damage if the gate is struck

DOORKING,  INC.

SWING GATE OPERATOR

Breakaway Hub

®

Easy access design, low maintenance & quiet operation

Adjustable electronic magnetic limits Auto-close timer (1-23 seconds) Gate overlap feature for bi-parting (dual) gate operation Simple connection for secondary operator in bi-parting gate systems Built-in On / Off switch Built-in alarm reset switch Selectable shadow / reverse loop function Magnetic lock power Ports for plug-in open and reverse loop detectors (DKS plug-in detectors only) Three 115 VAC convenience outlets for accessory transformers

TAP HERE FOR PRINTER VERSION

Steel Frame

ELECTRICAL

Access Control Solutions since 1948

Environmental: 10°F to 115°F (-12°C to 62°C) Thermostatically controlled heater kit recommended for colder environments Shipping weight approximately 175-225 lb (79-102 kg) depending on model and options selected Operator requires monitored Type B1 and/or Type B2 entrapment protection devices

TM

6500 VEHICULAR

record users access

Split housing allows easy access without having to remove the gate arm Easy to adjust electronic magnetic limits eliminate old style mechanical switches that can wear out, break or fail Unique breakaway hub design prevents gear box damage if the gate is struck Steel frame for strength and durability Easy to use manual release system 5-year limited warranty

Primary reduction is provided by a pulley / belt driving a 60:1 worm gear reduction system running in a continuous oil bath The 6500 rotates the gate 90° in approximately 12-14 seconds Operator mechanics are mounted on a steel frame plated for corrosion resistance Two-piece articulating arm mechanical slow-start / slow-stop function Mounting: operator requires a concrete mounting pad Keyed access is provided to release arm for manual gate operation in the event of a power outage Split polypropylene housing simplifies installation and maintenance. Unique breakaway hub helps to protect the gear box if the gate is rammed

MECHANICAL

Gate Tracker

Conforms To ANSI/CAN/UL 325:2017 Ed. 7 Certified To CSA C22.2 #247

TECHNICAL FEATURES

GATE TRACKER

MISCELLANEOUS

for strength and durability

RESIDENTIAL • COMMERCIAL • INDUSTRIAL

electronic magnetic limits

MEMBER:

Easily Adjustable

120 Glasgow Avenue, Inglewood, California 90301 U.S.A.  Tel: 310-645-0023   FAX: 310-641-1586 www.doorking.com© 2020 All Rights Reserved. Product specifications may change without notice. Rev. 6/20

Reporting output provides operator data to a DKS 1833,1835, 1837 or 1838 access control system (requires 2358 expansion board)

Environmental: 10°F to 115°F (-12°C to 62°C) Thermostatically controlled heater kit recommended for colder environments Shipping weight approximately 175-225 lb (79-102 kg) depending on model and options selected Operator requires monitored Type B1 and/or Type B2 entrapment protection devices

Split housing allows easy access without having to remove the gate arm Easy to adjust electronic magnetic limits eliminate old style mechanical switches that can wear out, break or fail Unique breakaway hub design prevents gear box damage if the gate is struck Steel frame for strength and durability Easy to use manual release system 5-year limited warranty

6500 VEHICULAR

ACCESS CONTROL SOLUTIONS

Primary reduction is provided by a pulley / belt driving a 60:1 worm gear reduction system running in a continuous oil bath The 6500 rotates the gate 90° in approximately 12-14 seconds Operator mechanics are mounted on a steel frame plated for corrosion resistance Two-piece articulating arm mechanical slow-start / slow-stop function Mounting: operator requires a concrete mounting pad Keyed access is provided to release arm for manual gate operation in the event of a power outage Split polypropylene housing simplifies installation and maintenance. Unique breakaway hub helps to protect the gear box if the gate is rammed

* Assumes gate to be in good condition and swinging in a level plane.  ** These operators use a step-down transformer to achieve 115 VAC operating voltage.

Reporting output provides operator data to a DKS 1833,1835, 1837 or 1838 access control system (requires 2358 expansion board)

Adjustable electronic magnetic limits Auto-close timer (1-23 seconds) Gate overlap feature for bi-parting (dual) gate operation Simple connection for secondary operator in bi-parting gate systems Built-in On / Off switch Built-in alarm reset switch Selectable shadow / reverse loop function Magnetic lock power Ports for plug-in open and reverse loop detectors (DKS plug-in detectors only) Three 115 VAC convenience outlets for accessory transformers

Easy access design, low maintenance & quiet operation

ACCESS CONTROL SOLUTIONS

* Assumes gate to be in good condition and swinging in a level plane. ** These operators use a step-down transformer to achieve 115 VAC operating voltage.