Built-in Power On / Off Switch
Direct Driven Limit Nuts for precise gate control
Auto-Close timer 1-23 sec
Ports for plug-in Open and Reverse Loop Detectors (DKS Detectors only)
TAP HERE FOR PRINTER VERSION
Access Control Solutions since 1948
Environmental: 10°F to 140°F (-12°C to 62°C)
Thermostatically Controlled Heater Kit recommended for colder environments.
Shipping weight approximately 175-225 lb (79-102 kg) depending on model and options selected.
Operator requires Type B1 or Type B2 entrapment protection devices with 10K resistive termination, otherwise the operator will not function.
Advanced Microprocessor Control Board with built-in operator diagnostics
Plug-in Loop Detectors simplify wiring and make installation easy
Low profile for underground parking applications
Keyed Manual Release
5-Year Limited Warranty
40:1 Gear Reduction running in a continuous oil bath
Gate speed approximately 10 in/sec (254 mm/sec)
3 inch (76.2mm) rails
G90 Galvanized Steel frame to prevent rusting
Fail-Secure, keyed quick release for manual gate operation in the event of a power outage
Rail assembly for 8 ft (2.43m) high gate
Rail assembly for 10 ft (3.05m) high gate
Rail assembly for 12 ft (3.66m) high gate
Rail assembly for 14 ft (4.27m) high gate
Polyethylene Powerhead Cover (required if powerhead assembly is mounted less than 8 ft (2.43 m) above the ground)
greatly reduce noise and vibration
COMMERCIAL • INDUSTRIAL
easily adjustable and don’t need to be reset after power outage
For 8’ (2.44m) high gate L = 12.25’ (3.73m)
For 10’ (3.05m) high gate L =14.25’ (4.34m)
For 12’ (3.66m) high gate L =16.25’ (4.95m)
For 14’ (4.27m) high gate L = 18.25’ (5.56m)
1. If the operator is mounted less than 8 feet above the ground, the optional powerhead cover (1175-020) is required.
2. II = Commercial; III = Limited Access; IV = Restricted Access.
3. Plug-in loop detector ports; open and reverse. DoorKing plug-in loop detectors only.
4. Operator is equipped with a Type A inherent detection system.